Pumps &
IndustrialEquipment

The workhorse of process industry fluid handling. API 610 defines 11 pump types: OH1–OH6 (overhung), BB1–BB5 (between-bearings), VS1–VS7 (vertical sump). All configurations — single-stage, multi-stage, horizontal, vertical — for hydrocarbons, process fluids, and water service. Carbon steel or stainless steel casings.

High-pressure positive displacement pumps for chemical injection, hydrotesting, well stimulation, and HP process service. Simplex, duplex, triplex, and quintuplex configurations. Available in hydraulically actuated and direct-acting designs. High pressure to 10,000+ psi.

Controlled-volume pumps for precise chemical injection — corrosion inhibitors, scale inhibitors, biocides, methanol, and MEG injection. Diaphragm or plunger type. Electronically controlled flow rate. ATEX-rated drives for hazardous area installation.

Positive displacement rotary pumps for viscous fluids — crude oil, fuel oil, lube oil, bitumen, polymer solutions. Internal and external gear pump types. Twin-screw and three-screw pumps for high-viscosity and shear-sensitive fluids. Low pulsation, smooth flow.

Vertical turbine pumps (VTP) and submersible motor pumps for deep well water supply, seawater lift, cooling water intake, firewater systems, and reservoir drainage. Bowl diameters 4″ to 24″. Motor submersible or column-mounted. Available in ASTM A532 chrome iron for abrasive water.

Listed and approved electric motor-driven and diesel engine-driven fire water pumps to NFPA 20 / EN 12845. Horizontal split-case, vertical inline, and vertical turbine configurations. UL/FM approved for insurance compliance. Jockey pump sets and complete pump skid packages available.

Slow-speed or high-speed reciprocating compressors for gas compression, gas lift, gas injection, vapor recovery, and pipeline boosting. Balanced-opposed or single-throw configurations. API 618 covers all design requirements for petroleum, petrochemical, and gas industry service. Power range 5 kW to 40+ MW.

Dynamic (turbo) compressors for large-volume, high-pressure gas service — gas processing, LNG, refinery service, and air separation. API 617 covers axial, integrally geared, and radially split compressors. Multi-stage configurations for high compression ratios.

Oil-injected and oil-free twin-screw compressors for instrument air, utility air, process air, and gas service. Compact, low-maintenance design. Sizes from 5 kW (utility air skids) to 1500 kW (process gas service). Air compressor packages with air dryers, receivers, and filtration.

Custom-designed and fabricated pressure vessels — separators (2-phase and 3-phase), scrubbers, knock-out drums, surge drums, filter vessels, accumulator vessels, and storage bullets. Carbon steel, stainless steel, clad plate, or Inconel materials. ASME VIII Div.1 or Div.2 with U-stamp.

Shell and tube heat exchangers to TEMA standards (R, C, B classes) and API 660 for process service. Plate-and-frame, air coolers (API 661), and double-pipe heat exchangers. Materials: CS, SS316L, alloy steel, duplex, titanium, and graphite. Complete thermal design and fabrication management.

Process heaters and direct-fired heaters for crude oil preheat, gas dehydration, heavy oil heating, and steam generation. Box-type and cylindrical configurations. API 560 design standard. Alloy steel tubes (P9/P11/P91) for elevated temperature service.

Hot-rolled wide flange H-beams (HEA, HEB, HEM to EN; W-sections to ASTM) for structural columns, beams, and pile foundations. Available in all standard sizes from 100×100 to 1000×400mm. ASTM A36 (Fy=250 MPa) and A572 Grade 50 (Fy=345 MPa). Also JIS H-beams to SS400.

Narrow flange I-beams (IPE to EN 10024; S-sections to ASTM A6) for floor beams, purlins, and secondary structural members. The traditional "I" profile with narrower flanges than H-beams. Sizes from IPE 80 to IPE 600 (EN) and S3 to S24 (ASTM).

Hot-rolled equal-leg (L×L×t) and unequal-leg (L1×L2×t) angles for bracing, connections, stair stringers, handrails, and structural fabrication. Sizes from 20×20×3mm to 200×200×20mm (equal) and various unequal combinations. To ASTM A36, EN 10056, and JIS SS400.

Parallel-flange channels (PFC to BS; UPE to EN; C-sections to ASTM A36) and tapered flange channels (UNP to EN) for structural frameworks, cable tray supports, stair stringers, and secondary structures. Sizes from 75×40mm to 430×100mm and C3 to C15 (ASTM).

Square hollow sections (SHS), rectangular hollow sections (RHS), and circular hollow sections (CHS) in hot-rolled and cold-formed construction. To ASTM A500, EN 10219, and BS 7 (hot-rolled). Used for columns, truss members, handrails, and architectural structures. Sizes from 20×20 to 500×500mm (SHS).

Carbon steel plates (ASTM A36, A516 Gr60/70, A572), chequered (tear drop / diamond pattern) plates for flooring and walkways, and open-bar grating (I-bar, flat bar) for industrial platforms, stairways, and trench covers. Plate thickness 3mm to 200mm in standard sizes.

Bourdon tube pressure gauges (Glycerine filled, SS Bourdon, all ranges), pressure transmitters (4–20mA HART, Foundation Fieldbus), pressure switches, differential pressure (DP) transmitters, and pressure safety valves (PSV/PRV). Ranges from vacuum to 1000+ bar. ATEX/IECEx Zone 1/2 approved.

Bimetallic thermometers (direct-mount and remote), RTD temperature elements (PT100 2/3/4-wire), thermocouple assemblies (Type K, E, J, T, S, B, R), temperature transmitters (HART/FF), thermowells (drilled bar, fabricated, machined pocket), and skin thermocouples for pipe surface measurement.

Orifice plates and orifice plate assemblies (AGA 3/ISO 5167), vortex flow meters, electromagnetic (mag) flow meters, Coriolis mass flow meters, ultrasonic flow meters, turbine flow meters, positive displacement meters, and rotameters. For all fluids — liquids, gases, and steam. Custody transfer rated where required.

Displacer level transmitters, magnetic level gauges (MLG), guided wave radar (GWR) level transmitters, non-contact radar level transmitters, differential pressure (DP) level transmitters, capacitance level switches, and ultrasonic level transmitters. For tanks, separators, knock-out drums, and boiler steam drums.

Pneumatically actuated control valves (cage-guided, plug-guided, single-seated) with positioner, solenoid valves (normally open, normally closed, 3-way, ATEX), electro-pneumatic transducers, and valve accessories (air sets, lock-up valves, limit switches, volume boosters).

SS316L instrument tubing (OD 6mm to 25mm, various wall thicknesses), compression fittings (Swagelok/Parker type — tee, elbow, union, reducer), instrument manifolds (2-valve, 3-valve, 5-valve), SS316 instrument valves (needle, ball, block and bleed), and tube supports and clamps.

LV (0.6/1kV) and MV (3.3kV, 6.6kV, 11kV, 33kV) power cables — XLPE insulated, PVC or LSZH sheathed, with or without steel wire armour (SWA) or steel tape armour (STA). Single-core and multi-core (2C, 3C, 4C). To IEC 60227, IEC 60502, BS 5467, and BS 6346. Conductor: copper or aluminium.

Multi-pair and multi-core control cables (OS, IS, FRPVC, XLPE/SWA) for motor starters, interlock systems, and process control. Instrumentation cables (screened/shielded, twisted pair, individually and overall screened — IS/OS) for 4–20mA analogue signals, thermocouple extension cables, and data transmission.

CAT6/CAT6A twisted pair data cables for ethernet communication and field bus networks. Multimode and single-mode armoured fibre optic cables for long-distance data transmission in industrial plants. PROFIBUS cables, FOUNDATION Fieldbus segment cables, and intrinsically safe (IS) fieldbus cables for hazardous areas.

Hot-dip galvanised (HDG) and SS316 cable trays (return flange and channel tray), cable ladders (rung ladders for heavy cable routes), cable trunking, and GRP cable trays for corrosive environments. Electrical conduit — rigid steel (RSC), EMT, and PVC rigid conduit. All widths from 50mm to 600mm and depths 25mm–150mm.

GRP and stainless steel junction boxes (safe area and ATEX Zone 1/2 rated) with IP65/IP66/IP67/IP68 ingress protection. Pre-wired marshalling junction boxes (MJB), multifunction junction boxes (FJB), and hook-up junction boxes for field instrument connections. Termination strips, earthing bars, and cable gland plates.

LED industrial luminaires (floodlights, high-bay, hazardous area ATEX Zone 1/2 lighting), temporary construction lighting, navigation warning lights, anti-collision lights, and emergency exit lighting. Lighting distribution boards (LDB), socket outlets (CEE/CEEFORM industrial), and weatherproof accessories.

SMAW stick electrodes (AWS E6010, E6013, E7018, E7016, E308L-16, E316L-16, E309-16, E2209 Duplex), GTAW (TIG) filler wires, GMAW (MIG) wire spools, SAW flux and wire combinations, FCAW wires, and oxy-acetylene welding rods. All standard AWS and ISO designations for CS, SS, alloy, and duplex welding.

Grinding wheels and discs (flat, depressed centre, cut-off), flap discs, fibre discs, and wire brushes for angle grinders. Hand and power hacksaw blades. Hole saws and annular cutters. Abrasive blasting media (steel grit, steel shot, aluminium oxide, garnet, glass bead). Plasma cutting electrodes and nozzles.

Hard hats (EN 397/ANSI Z89.1), safety boots (EN ISO 20345 S3), safety glasses and face shields, chemical splash goggles, ear defenders and ear plugs, high-visibility vests and coveralls, chemical-resistant gloves (nitrile, neoprene, PVC, leather), full-body harnesses (EN 361), and respiratory protective equipment (RPE).

Machinery lubricating oils (ISO VG grades — mineral and synthetic), greases (NLGI grades 0–3, EP rated), hydraulic oils (ISO VG 32/46/68), gear oils (EP 80W90/140), compressor oils, high-temperature greases (MoS₂, PTFE-based), food-grade lubricants (NSF H1 rated), and penetrating/anti-seize compounds.

Epoxy primers (two-component and single pack), alkyd topcoats, high-build epoxy intermediate coats, heat-resistant paints (up to 600°C for exhaust stacks, heaters, and furnace components), anti-corrosion coatings (zinc-rich primers), and insulation jacketing materials. Supplied per project coating specifications (NACE, ISO 12944).

Professional hand tools (spanners, wrenches, hammers, pliers, screwdrivers), torque wrenches (calibrated, preset, and digital), chain hoists and lever hoists (0.5T–20T), wire rope slings, round slings, shackles (bow and dee), and rigging equipment (hooks, swivels, turnbuckles). SWL/WLL marked and certified.